Fast Strip concrete cleaner removes oil grease
Fast Strip concrete cleaner removes oil grease from concrete surfaces. Fast Strip is a chemical agent specifically designed to remove tire marks and acrylic coatings from concrete and masonry surfaces.
Fast Strip concrete cleaner removes oil grease and tyre marks from concrete floors. It deeply penetrates the concrete pores to bring oil and grease to the surface. It can then be removed with a scrubber dryer machine. It acts over a time period of about thirty minutes producing a clean stain free concrete surface.
Fast Strip does not contain solvents. It is non Hazardous with a lower cost price compared to most solvent containing cleaners. This makes it easy to store and easy to transport. And safe to work with in all environments.
Fast Strip concrete cleaner removes oil grease advantages:
- Acrylic Curing Compounds
- Old, Yellowed Acrylic Coatings
- Waxes, Paint, & Tire Marks
- Carpet and Tile Mastic
- Asphalt Residue
- Construction Chalk
- Tape Residue etc.
FAST-STRIP SUBSTANTIALLY LIGHTENS:
- Oil and Grease Stains
- Permanent Marker Ink
FAST-STRIP PRODUCT BENEFITS:
- Easy to Apply
- Works Fast.
- Does its work in 30 minutes!
- Requires little scrubbing.
- Works chemically.
- Citrus Odor.
- No hazardous-solvent chemical fumes.
- Low Price.
- Less costly than many non-hazardous solutions.
Apply FAST-STRIP onto the surface with sprayer or mop at a rate of 5 sqm/L . Use stiff-bristle brooms to work FAST-STRIP into the concrete surface and to distribute the product uniformly. Let the product act for a full 30 minutes. Don not let floor go dry within the 30 minutes. Keep adding FAST-STRIP as often as necessary to keep surface wet for the entire 30 minutes. Only after the 30 minutes have lapsed start removing the left over solution and clean thoroughly. Use Fast-Clean to neutralise the Fast-Strip
Exercise caution when using FAST-STRIP on areas adjacent to surfaces that could be damaged if exposed to it.
Click the link to read the MSDS sheet: MSDS FAST-STRIP